Nylon Cable Cleat



The Falcon Two Bolt single cable cleat is a non-metallic cable cleat which has been designed, constructed, and tested in accordance with the International Standard ‘cable cleats for Electrical Installations’ (IEC 61914).

It ensures the retention and securing of single cables, without damaging or deforming the cable. The cable cleat is manufactured from various materials making it suitable for both indoor and outdoor applications. Due to its unique twin arc internal patent pending design profile it exhibits excellent retention, limiting both the axial and lateral movement. The Falcon Two Bolt cable cleats have an excellent range take and are suitable for cable diameters of 38mm up to 135mm in only eight sizes. This cable cleat has two M12 clearance holes for securing it to a mounting surface, which allows for either M10 or M12 fasteners to be used.


  • Third party certification to IEC 61914
  • Available in three different materials:
    • Nylon
    • Low Smoke & Fume (LSF), Zero Halogen (LS0H, Phosphorus Free and V0 Nylon
    • LUL approved polymer
  • Sunlight (UV) & weather resistant
  • Operating temperature -40°C to +60°C
  • Can be double stacked
  • 38 – 135mm in 8 sizes
  • Excellent axial & lateral load retention
  • Two bolt fixing design
Short Circuit Testing to IEC 61914 – Clause 9.5
Multicore Formation Parallel Formation
Two short circuits 600mm fixed cleat centres One short circuit 600mm fixed cleat centres 105mm cable centres Two short circuits 600mm fixed cleat centres 105mm cable centres
0.1 sec 0.1 sec 0.1 sec
76kA Peak 110kA Peak 86kA Peak
36.2kA RMS 50.0kA RMS 40.9kA RMS

Technical Data

Type Type 6.1.2. Non Metallic 2BC – Two Bolt Cable Cleat
Design Specification IEC 61914
Temperature for permanent application -40°C to +60°C
IEC 61914 clause / part 6.2
Needle Flame Test Pass – 120 second flame application time
IEC 61914 clause
10.0, 10.1, IEC 60695-11-5
Lateral Load Test 16kN – 26kN, IEC 61914 clause 9.3
Axial Load Test 2.75kN – 5kN, IEC 61914 clause 9.4
Impact Resistance Pass – Very Heavy
IEC 61914 clause 6.3, 6.3.5, 9.2
UV Resistance Pass – IEC 61914 clause, 11.1
Material Standard Nylon, UL94 V0 Nylon or LUL Approved Polymer
Note: V0 Nylon & LUL Polymer are Low Smoke & Fume (LSF), Zero Halogen (LS0H) and Phosphorus Free
Material Colour Black
UL Certificate 20181221_E490770
UL Compliance Standards UL 2239, CSA C22.2 No. 18.4-15

Order reference examples: for standard nylon 2BC038048, for LSF suffix Z (2BC038048Z), for LUL approved polymer suffix LUL (2BC038048LUL). * LUL products are 5% heavier than the weights shown in table. Fasteners required to secure the cable cleat to the support structure are not included with the ordering references shown in the selection table but can be supplied on request – see cleat fixing pack page 64-65.