Sabre

Plastic Cable Cleat

CMP
,

Description

The Sabre One Bolt single cable cleat is a non-metallic cable cleat which has been designed, constructed,
and tested in accordance with the International Standard ‘cable cleats for Electrical Installations’ (IEC 61914).

It ensures the retention and securing of single cables, without damaging or deforming the cable. The cable cleat is manufactured from various materials making it suitable for both indoor and outdoor applications. Due to its unique twin arc internal patent pending design profile it exhibits excellent retention, limiting both the axial and lateral cable movement. The Sabre One Bolt cable cleat is available in ten sizes suitable for cable diameters of 10mm up to 57mm. This cable cleat has an M10 clearance hole for securing it to a mounting surface.

Features

  • Third party certification to IEC 61914
  • Available in three different materials:
    • Nylon
    • Low Smoke & Fume (LSF), Zero Halogen (LS0H), Phosphorus
    • Free and V0 Nylon
    • LUL approved polymer
  • Sunlight (UV) & weather resistant
  • Operating temperature -40°C to +60°C
  • 10 – 57mm in 10 sizes
  • Excellent axial & lateral load retention
  • Single bolt fixing design
Short Circuit Testing to IEC 61914 – Clause 9.5
Multicore Formation Parallel Formation
One short circuit 600mm fixed cleat centres Two short circuits 600mm fixed cleat centres One short circuit 600mm fixed cleat centres 105mm cable centres
0.1 sec 0.1 sec 0.1 sec
113kA Peak 99kA Peak 68kA Peak
51.3kA RMS 47.1kA RMS 32.3kA RM

Technical Data

Type Type 6.1.2. Non Metallic 1BC – One Bolt Cable
Cleat
Design Specification IEC 61914
Temperature for permanent application -40°C to +60°C
IEC 61914 clause / part 6.2
Needle Flame Test Pass – 120 second flame application time
IEC 61914 clause
10.0, 10.1, IEC 60695-11-5
Lateral Load Test 1kN – 1.25kN
IEC 61914 clause 9.3
Axial Load Test 0.5kN-1kN
IEC 61914 clause 9.4
Impact Resistance Pass – Very Heavy
IEC 61914 clause 6.3, 6.3.5, 9.2
UV Resistance Pass
IEC 61914 clause 6.5.1.2, 11.1
Material Standard Nylon, UL94 V0 Nylon or LUL Approved Polymer

Note: V0 Nylon & LUL Polymer are Low Smoke & Fume (LSF), Zero Halogen (LS0H) and Phosphorus Free

Material Colour Black
UL Certificate 20181221_E490770
UL Compliance Standards UL 2239, CSA C22.2 No. 18.4-15

For lateral and axial load ratings or short circuit ratings of LUL polymer products

Order reference examples: for standard nylon 1BC1013, for LSF suffix Z (1BC1013Z), for LUL approved polymer suffix LUL (1BC1013LUL). * LUL products are 5% heavier than the weights shown in table. Fasteners required to secure the cable cleat to the support structure are not included with the ordering references shown in the selection table but can be supplied on request.